isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 1004p6t7b13m1qeh 2:1 10/6/2006 ST146003 c tn 1 1 pos. 1pos. 2pos. 3 switch function on on on 2-3, 5-6, 8-9, 11-12 2-3, 5-4, 8-9, 11-10 2-1, 5-4, 8-7, 11-10 note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 2a @ 250 vac 5a @ 120 vac or 28 vdc 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resist ance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant. 12. hardware to be shipped bulk t100004 - hexnut - qty 2 t100012 - lockwasher - qty 1 t100003 - lockring - qty 1 c 16519 inventor drawn, edits done 10/06/2006 tn 3 2 1 10 7 4 1 4pdt 3 way circuit note: jumper pin 3 to 5 12 11 10 9 8 7 6 5 4 6 5 4 3 2 1 3 2 1 pos. 1 pos. 2 pos. 3 12 11 10 9 8 7 3 2 1 12 11 10 9 8 7 6 5 4 (in) (in) (in) (in) (in) (in) (out) (out) (out) (out) (out) (out) 12.60 [.496 in] 11.38 [.448 in] .51 [.020 in] 25 ~ pos. 1 pos. 2 pos. 3 4.70 [.185 in] .76 [.030 in] epoxy seal .79 [.031 in] 1.65 [.065 in] 12.70 [.500 in] 21.59 [.850 in] 6.09 [.240 in] n 10.54 [.415 in] 3.96 [.156 in] 1.98 [.078 in] 1.19 [.047 in] 2.03 [.080 in] 4.83 [.190 in] 15/32-32 uns-2a e-switch marking on opposite side.
|
